Utility-Scale vs. Residential-Scale Solar PV
Utilities may want to listen up. According to the Brattle Group, U.S. utility-scale solar photovoltaic (PV) systems are significantly more cost effective than residential-scale, or rooftop, solar PV systems to achieve the economic and policy benefits of PV solar.
|Comparing benefits and generation costs of PV utility- and residential-scale solar. Click on image to enlarge. Credit: The Brattle Group|
“Comparative Generation Costs of Utility-Scale and Residential-Scale PV in Xcel Energy Colorado’s Service Area,” prepared for First Solar with support from the Edison Electric Institute, is the first to focus on a “solar-to-solar” comparison of equal amounts of residential- and utility-scale PV solar deployed on an actual utility system.
Using real-world scenarios based on data from Xcel Energy Colorado, the study compares the per megawatt-hour (MWh) customer supply costs of adding 300 megawatts (MW) direct current (DC) of PV panels in the form of either 60,000 distributed 5 kilowatt (kW) rooftop systems owned or leased by retail customers, or 300 MW of utility-scale solar power plants that sell their entire output to Xcel Energy Colorado under long-term power purchase agreements.
“Over the last decade, solar energy costs for both rooftop and bulk-power applications have come down dramatically,” said Dr. Peter Fox-Penner, Brattle principal and co-author of the study. “But utility-scale solar will remain substantially less expensive per kWh generated than rooftop PV. In addition, utility-scale PV allows everyone access to solar power. From the standpoint of cost, equity, and environmental benefits, large-scale solar is a crucial resource.”
Based on historical data, the analysis finds that projected 2019 utility-scale PV power costs in Xcel Energy Colorado’s service territory will range from $66/MWh to $117/MWh (6.6¢/kWh to 11.7¢/kWh) across all scenarios, while projected power costs for a typical, customer-owned PV system will range from $123/MWh to $193/MWh (12.3¢/kWh to 19.3¢/kWh).
The study attributes the large difference in per-MWh costs between utility- and residential-scale systems primarily to economies of scale and greater solar electric output resulting from optimized panel orientation and tracking assumed for utility-scale systems. The improved orientation and tracking of utility-scale solar also result in a higher capacity factor that causes it to avoid approximately 50 percent more carbon dioxide emissions than the same capacity of residential-scale solar PV on the Xcel Energy Colorado system. The reason utility-scale solar saves so much more carbon than rooftop PV is because the solar energy per MW is much higher on utility-scale due to better placement and tracking capability, according to the report.
“Thoughtful energy policy requires a thorough understanding of the relative costs of utility- and residential-scale solar PV for achieving policy goals,” said Frank Graves, Brattle principal and leader of the firm’s utilities practice. “By directly comparing the costs and benefits of PV solar deployed in equal amounts of residential- and utility-scale systems based on utility-supplied data, the Brattle study provides a key contribution to the policy discussion about solar PV and should be essential reading for regulators and other policymakers.”
– see this report