Seleccionar página

OUR WORKS / Nuestros Trabajos

publications / publicaciones
Potential CO2 capture in one-coat limestone mortar modified with Mg3Al–CO3 calcined hydrotalcites using ultrafast testing technique (2021)

Potential CO2 capture in one-coat limestone mortar modified with Mg3Al–CO3 calcined hydrotalcites using ultrafast testing technique (2021)

The combined effect of CO2 and calcined hydrotalcite on one-coat limestone mortar properties (2021)

The combined effect of CO2 and calcined hydrotalcite on one-coat limestone mortar properties (2021)

Accelerated carbonation of fresh cement-based products containing recycled masonry aggregates for CO2 sequestration (2021)

Accelerated carbonation of fresh cement-based products containing recycled masonry aggregates for CO2 sequestration (2021)

Mitigation of CO2 emissions by hydrotalcites of Mg3Al-CO3 at 0 °C and high pressure (2021)

Mitigation of CO2 emissions by hydrotalcites of Mg3Al-CO3 at 0 °C and high pressure (2021)

Effect of moderate temperatures on compressive strength of ultra-high-performance concrete: A microstructural analysis (2021)

Effect of moderate temperatures on compressive strength of ultra-high-performance concrete: A microstructural analysis (2021)

Performance of self-compacting mortars with granite sludge as aggregate (2020)

Performance of self-compacting mortars with granite sludge as aggregate (2020)

Mechanical and durability performance of mortars with fine recycled concrete aggregates and reactive magnesium oxide as partial cement replacement. (2020)

Mechanical and durability performance of mortars with fine recycled concrete aggregates and reactive magnesium oxide as partial cement replacement. (2020)

Feasible use of colliery spoils as subbase layer for low-traffic roads (2019)

Feasible use of colliery spoils as subbase layer for low-traffic roads (2019)

Promotion of circular economy: steelwork dusts as secondary raw material in conventional mortars. Environ Sci Pollut Res (2019)

Promotion of circular economy: steelwork dusts as secondary raw material in conventional mortars. Environ Sci Pollut Res (2019)

Optimum Particle Size of Treated Calcites for CO2 Capture in a Power Plant. Materials 2019, 12, 1284

Optimum Particle Size of Treated Calcites for CO2 Capture in a Power Plant. Materials 2019, 12, 1284

MOTIVATION OF STUDENTS THROUGH THE GAMIFICATION TECHNIQUE IN THE SUBJECT OF THEORY OF STRUCTURES. Proceedings of INTED2018 Conference Valencia Spain 2018. ISBN: 978-84-697-9480-7

MOTIVATION OF STUDENTS THROUGH THE GAMIFICATION TECHNIQUE IN THE SUBJECT OF THEORY OF STRUCTURES. Proceedings of INTED2018 Conference Valencia Spain 2018. ISBN: 978-84-697-9480-7

Promotion of Circular Economy: Steelwork Dusts as Secondary Raw Material in Conventional Mortars. Proceedings 2018, 2, 1313 (Environmental Science and Pollution Research)

Promotion of Circular Economy: Steelwork Dusts as Secondary Raw Material in Conventional Mortars. Proceedings 2018, 2, 1313 (Environmental Science and Pollution Research)

STUDY OF THE USE OF DIFFERENT CHEMICAL ADMIXTURES IN MORTARS MANUFACTURED WITH RECYCLED SAND FROM CDW. (2016) II International Conference on Concrete Sustainability ICCS16. ISBN: 978-84-945077-7-9

STUDY OF THE USE OF DIFFERENT CHEMICAL ADMIXTURES IN MORTARS MANUFACTURED WITH RECYCLED SAND FROM CDW. (2016) II International Conference on Concrete Sustainability ICCS16. ISBN: 978-84-945077-7-9

Hydration of Reactive MgO as Partial Cement Replacement and Its Influence on the Macroperformance of Cementitious Mortars. Advances in Materials Science and Engineering Volume 2019 (2019), Article ID 9271507, 12 pages

Hydration of Reactive MgO as Partial Cement Replacement and Its Influence on the Macroperformance of Cementitious Mortars. Advances in Materials Science and Engineering Volume 2019 (2019), Article ID 9271507, 12 pages

Removal of S-metolachlor herbicide from aqueous solutions by meso and microporous organosilica materials. Microporous and Mesoporous Materials 278 (2019) 35–43

Removal of S-metolachlor herbicide from aqueous solutions by meso and microporous organosilica materials. Microporous and Mesoporous Materials 278 (2019) 35–43

The Influence of Heat and Mechanical Treatment of Concrete Rubble on the Properties of Recycled Aggregate Concrete. Materials 2019, 12, 0367

The Influence of Heat and Mechanical Treatment of Concrete Rubble on the Properties of Recycled Aggregate Concrete. Materials 2019, 12, 0367

Safe use of electric arc furnace dust as secondary raw material in selfcompacting mortars production. Journal of Cleaner Production 211 (2019) 1375-1388

Safe use of electric arc furnace dust as secondary raw material in selfcompacting mortars production. Journal of Cleaner Production 211 (2019) 1375-1388

A Double Barrier Technique with Hydrotalcites for Pb Immobilisation from Electric Arc Furnace Dust. Materials 2019, 12, 633;

A Double Barrier Technique with Hydrotalcites for Pb Immobilisation from Electric Arc Furnace Dust. Materials 2019, 12, 633;

Performance and durability properties of self-compacting mortars with electric arc furnace dust as filler. Journal of Cleaner Production 219 (2019) 818-832

Performance and durability properties of self-compacting mortars with electric arc furnace dust as filler. Journal of Cleaner Production 219 (2019) 818-832

Durability of self-compacting concrete made from non-conforming fly ash from coal-fired power plants. Construction and Building Materials 189 (2018) 993–1006

Durability of self-compacting concrete made from non-conforming fly ash from coal-fired power plants. Construction and Building Materials 189 (2018) 993–1006

The role of pH on leaching of heavy metals and chlorides from electric arc furnace dust in cement-based mortars. Construction and Building Materials 183 (2018) 365–375

The role of pH on leaching of heavy metals and chlorides from electric arc furnace dust in cement-based mortars. Construction and Building Materials 183 (2018) 365–375

Mechanical behaviour of self-compacting concrete made with non-conforming fly ash from coal-fired power plants. Construction and Building Materials 182 (2018) 385–398

Mechanical behaviour of self-compacting concrete made with non-conforming fly ash from coal-fired power plants. Construction and Building Materials 182 (2018) 385–398

Wastes as Aggregates, Binders or Additions in Mortars: Selecting Their Role Based on Characterization. Materials 2018 11(3) 453

Wastes as Aggregates, Binders or Additions in Mortars: Selecting Their Role Based on Characterization. Materials 2018 11(3) 453

Mechanical and durability behaviour of self-compacting concretes for application in the manufacture of hazardous waste containers. Construction and Building Materials 168 (2018) 442-458

Mechanical and durability behaviour of self-compacting concretes for application in the manufacture of hazardous waste containers. Construction and Building Materials 168 (2018) 442-458

Durability of self-compacting concrete made with recovery filler from hot-mix asphalt plants. Construction and Building Materials 161 (2018) 407-419

Durability of self-compacting concrete made with recovery filler from hot-mix asphalt plants. Construction and Building Materials 161 (2018) 407-419

Texture and Microstructure of NiO Derived from Ni(OH)2 in Vacuum. Surface Technology. 26 (1985) 261-268

Texture and Microstructure of NiO Derived from Ni(OH)2 in Vacuum. Surface Technology. 26 (1985) 261-268

Effect of Crystallinity in the Thermal Behaviour of Nichel Hydroxide. Journal of Materials Science. 21 (1986) 3668-3672

Effect of Crystallinity in the Thermal Behaviour of Nichel Hydroxide. Journal of Materials Science. 21 (1986) 3668-3672

Mechanochemical Preparation and Degradation of LiCoO2. Reactivity of Solids 4 (1987) 163-171.

Mechanochemical Preparation and Degradation of LiCoO2. Reactivity of Solids 4 (1987) 163-171.

Mechanochemical Transformation of γ-FeOOH into γ-Fe2O3 in the Presence of Li2CO3. Journal of Materials Science Letters 6 (1987) 223-224.

Mechanochemical Transformation of γ-FeOOH into γ-Fe2O3 in the Presence of Li2CO3. Journal of Materials Science Letters 6 (1987) 223-224.

Synthesis and Alteration of α-LiFeO2 by Mechanochemical Processes. Journal of Materials Science 23 (1988) 2971-2974.

Synthesis and Alteration of α-LiFeO2 by Mechanochemical Processes. Journal of Materials Science 23 (1988) 2971-2974.

TG And DSC Studies of Lithium Insertion in LiFe5O8. Thermochimica Acta 133 (1988) 203-207.

TG And DSC Studies of Lithium Insertion in LiFe5O8. Thermochimica Acta 133 (1988) 203-207.

Low-Temperature Hydrohermal Transformation of LiCoO2 and HCoO2. Materials Research Bulletin 23 (1988) 899-904

Low-Temperature Hydrohermal Transformation of LiCoO2 and HCoO2. Materials Research Bulletin 23 (1988) 899-904

TG And DSC Studies of Lithium Insertion Transition Metal Compounds. Materials Chemistry And Physics 20 (1988) 145-152.

TG And DSC Studies of Lithium Insertion Transition Metal Compounds. Materials Chemistry And Physics 20 (1988) 145-152.

Thermal Evolution of the Lithiation Product of Mn3O4. Thermochimica Acta 146 (1989) 365-369.

Thermal Evolution of the Lithiation Product of Mn3O4. Thermochimica Acta 146 (1989) 365-369.

Assessment of a new carbon tetrachloride destruction system based on a microwave plasma torch operating at atmospheric pressure. Journal of Hazardous Materials 148 (2007) 419–427.

Assessment of a new carbon tetrachloride destruction system based on a microwave plasma torch operating at atmospheric pressure. Journal of Hazardous Materials 148 (2007) 419–427.

Anionic Clays with variable valence cations: Synthesis and caracterization of [Co1-xAlx(OH)2] (CO3)x/2· n H20.  Chem. Mater. 3 (1991) 626-630.

Anionic Clays with variable valence cations: Synthesis and caracterization of [Co1-xAlx(OH)2] (CO3)x/2· n H20. Chem. Mater. 3 (1991) 626-630.

Preparation and thermal stability of Manganese-containing hydrotalcite, [Mg0.75MnII0.04MnIII0.21(OH)2] (CO3)0.11·n H2O. J. Mater. Chem. 4 (1994) 1117-1121.

Preparation and thermal stability of Manganese-containing hydrotalcite, [Mg0.75MnII0.04MnIII0.21(OH)2] (CO3)0.11·n H2O. J. Mater. Chem. 4 (1994) 1117-1121.

Synthesis and Characterization of New Hydrotalcite-like Compounds Containing Ni(II) and Mn(III) in the Hydroxide Layers and of Their Calcination Products. Journal of Solid State Chemistry 124, 205–213 (1996).

Synthesis and Characterization of New Hydrotalcite-like Compounds Containing Ni(II) and Mn(III) in the Hydroxide Layers and of Their Calcination Products. Journal of Solid State Chemistry 124, 205–213 (1996).

New Hydrotalcite-like compounds containing Ytttrium. Chem. Mater. 9 (1997) 312–318.

New Hydrotalcite-like compounds containing Ytttrium. Chem. Mater. 9 (1997) 312–318.

The effect of iron on the crystalline phases formed upon thermal decomposition of Mg–Al–Fe hydrotalcites. Mater. Chem. 8(11) (1998) 2507–2514.

The effect of iron on the crystalline phases formed upon thermal decomposition of Mg–Al–Fe hydrotalcites. Mater. Chem. 8(11) (1998) 2507–2514.

Local Order in Thermal Decomposition Products of Layered Double Hydroxides. Synchrotron Radiation at Daresbury Laboratory. 1(1) (1999) 378-380.

Synthesis of Cd/(Al+Fe) layered double hydroxides and characterization of the calcination products. Journal of Solid State Chemistry 180 (2007) 3434–3442

Synthesis of Cd/(Al+Fe) layered double hydroxides and characterization of the calcination products. Journal of Solid State Chemistry 180 (2007) 3434–3442

Influence of divalent metal on the decomposition products of hydrotalcite-like ternary systems MII–Al–Cr (MII = Zn, Cd). Materials Chemistry and Physics 132 (2012) 375– 386

Influence of divalent metal on the decomposition products of hydrotalcite-like ternary systems MII–Al–Cr (MII = Zn, Cd). Materials Chemistry and Physics 132 (2012) 375– 386

Adsorption of non-ionic pesticide S-Metolachlor on layered double hydroxides intercalated with dodecylsulfate and tetradecanedioate anions. Applied Clay Science 65-66 (2012) 72–79.

Adsorption of non-ionic pesticide S-Metolachlor on layered double hydroxides intercalated with dodecylsulfate and tetradecanedioate anions. Applied Clay Science 65-66 (2012) 72–79.

Pesticides adsorption–desorption on Mg–Al mixed oxides. Kinetic modeling, competing factors and recyclability. Chemical Engineering Journal 221 (2013) 214–221.

Pesticides adsorption–desorption on Mg–Al mixed oxides. Kinetic modeling, competing factors and recyclability. Chemical Engineering Journal 221 (2013) 214–221.

Adsorption of the herbicide S-Metolachlor on periodic mesoporous organosilicas. Chemical Engineering Journal 228 (2013) 205–213.

Adsorption of the herbicide S-Metolachlor on periodic mesoporous organosilicas. Chemical Engineering Journal 228 (2013) 205–213.

Mesoporous phenolic resin and mesoporous carbon for the removal of S-Metolachlor and Bentazon herbicides. Chemical Engineering Journal 251 (2014) 92–101.

Mesoporous phenolic resin and mesoporous carbon for the removal of S-Metolachlor and Bentazon herbicides. Chemical Engineering Journal 251 (2014) 92–101.

Evaluation of different bridged organosilicas as efficient adsorbents for the herbicide S-metolachlor. RSC Advances. 5 (2015) 24158-24166

Evaluation of different bridged organosilicas as efficient adsorbents for the herbicide S-metolachlor. RSC Advances. 5 (2015) 24158-24166

Experimental study of the mechanical stabilization of electric arcfurnace dust using fluid cement mortars. Journal of Hazardous Materials.  Journal of Hazardous Materials 326 (2017) 26–35.

Experimental study of the mechanical stabilization of electric arcfurnace dust using fluid cement mortars. Journal of Hazardous Materials. Journal of Hazardous Materials 326 (2017) 26–35.

Potential use of modified hydrotalcites as adsorbent of Bentazonand Metazachlor. Applied Clay Science 141 (2017) 300–307.

Potential use of modified hydrotalcites as adsorbent of Bentazonand Metazachlor. Applied Clay Science 141 (2017) 300–307.

Introducción a los Cementos. Universidad de Córdoba Publicaciones, 2004, ISBN 84-7801-731-3. Depósito legal: CO-1322-04

Introducción a los Cementos. Universidad de Córdoba Publicaciones, 2004, ISBN 84-7801-731-3. Depósito legal: CO-1322-04

Manual de la aplicación informática para el cálculo en diagramas de cementos. 2011. UNIVERSIDAD DE CÓRDOBA. SERVICIO DE PUBLICACIONES, 2011. ISBN 978-84-9927-094-4

Manual de la aplicación informática para el cálculo en diagramas de cementos. 2011. UNIVERSIDAD DE CÓRDOBA. SERVICIO DE PUBLICACIONES, 2011. ISBN 978-84-9927-094-4

Caracterización Físico-Química de los Morteros y de las Pinturas Murales de la Villa Romana de El Ruedo (Almedinilla, Córdoba). Anales de Arqueología Cordobesa (2003) 167-199

Caracterización Físico-Química de los Morteros y de las Pinturas Murales de la Villa Romana de El Ruedo (Almedinilla, Córdoba). Anales de Arqueología Cordobesa (2003) 167-199

Physical-Chemical Characterization of Roman Mortars in El Ruedo at Almedinilla, Córdoba. Materiales de construcción (Madrid) 54(275) (2004) 39 – 51.

Physical-Chemical Characterization of Roman Mortars in El Ruedo at Almedinilla, Córdoba. Materiales de construcción (Madrid) 54(275) (2004) 39 – 51.

Application of the Second Derivative of the Kubelka–Munk Function to the Semiquantitative Analysis of Roman Paintings. COLOR research and application 30(6) (2005) 448-456.

Application of the Second Derivative of the Kubelka–Munk Function to the Semiquantitative Analysis of Roman Paintings. COLOR research and application 30(6) (2005) 448-456.

An easy method to estimate the concentration of mineral pigments in colored mortars. Dyes and Pigments 101 (2014) 329-337.

An easy method to estimate the concentration of mineral pigments in colored mortars. Dyes and Pigments 101 (2014) 329-337.

Assessment of clays from Puertollano (Spain) for their use in fine ceramic by diffuse reflectance spectroscopy. Applied Clay Science 108 (2015) 135 – 143.

Assessment of clays from Puertollano (Spain) for their use in fine ceramic by diffuse reflectance spectroscopy. Applied Clay Science 108 (2015) 135 – 143.

A general method for the quantitative assessment of mineral pigments. Talanta146 (2016) 303–309.

A general method for the quantitative assessment of mineral pigments. Talanta146 (2016) 303–309.

Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing. Construction and Building Materials 40 (2013) 679–690.

Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing. Construction and Building Materials 40 (2013) 679–690.

Properties of masonry mortars manufactured with fine recycled concrete aggregates. Construction and Building Materials 71(2014) 289-298.

Properties of masonry mortars manufactured with fine recycled concrete aggregates. Construction and Building Materials 71(2014) 289-298.

Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production – Part-I: ceramic masonry waste. Journal of Cleaner Production. Journal of Cleaner Production 87 (2015) 692-706

Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production – Part-I: ceramic masonry waste. Journal of Cleaner Production. Journal of Cleaner Production 87 (2015) 692-706

Combined Effects of Non-Conforming Fly Ash and Recycled Masonry Aggregates on Mortar Properties. Materials 2016, 9, 729

Combined Effects of Non-Conforming Fly Ash and Recycled Masonry Aggregates on Mortar Properties. Materials 2016, 9, 729

Mechanical behaviour of self-compacting concrete made with recovery filler from hot-mix asphalt plants. Construction and Building Materials 131 (2017) 114–128.

Mechanical behaviour of self-compacting concrete made with recovery filler from hot-mix asphalt plants. Construction and Building Materials 131 (2017) 114–128.